The following resources are available from Moore at no cost and are available for downloading below.
Anyone responsible for selecting or operating industrial axial flow fans needs some basic knowledge of fan design and utilization in order to make optimum decisions. Moore has prepared a number of short technical articles, one printed page or less, covering these basic subjects. We hope you will find these "Tech NOTES" helpful. For more in-depth information, select see “Engineering Papers” section below.
Engineering Papers and Owner's manuals for Moore fans below require Adobe Acrobat Reader®. (Acrobat Reader 5.0 or newer is recommended) If you do not have Acrobat Reader® on your computer, a free download is available at the link provided:
TECH NOTES:
- HOW TO RECOGNIZE A HIGH-EFFICIENCY FAN Describes the complex blade shape necessary to provide uniform flow, the most important requirement of a fan wheel.
- WHY MOORE FANS HAVE TWO HUBS Explains the considerable difference between the aerodynamic and structural requirements of a fan hub.
- METHODS FOR MODULATING AIRFLOW Compares the three common methods for reducing airflow as conditions permit, to reduce power use and lower noise level.
- HOW TO SELECT A LOW-NOISE FAN Noise level calculation formulae indicate performance considerations for reducing noise and other means of lowering noise are discussed.
- THE ADVANTAGES OF RESILIENT "HELICOPTER" BLADES Discussion of the reduction of stress and the avoidance of critical speeds using variable-speed motors.
- COOLER UPGRADING: A TIMELY TOPIC
ENGINEERING PAPERS:
- THEORY OF RATING The basic definitions and formulas used in fan selection.
- FAN DESIGN Considerations in the design of axial flow fans for high energy and efficiency.
- RESONANCE OF PIVOTED BLADES Calculation of resonant frequencies for Moore fans with pivoted fan blades.
- NOISE LEVEL PREDICTION Gives formulas used by Moore to predict noise levels at user-defined locations and for multiple aerial cooler fans.
- MODULATING AIR FLOW Gives formulas that can be used to estimate horsepower, PWL and SPL resulting from modulating air flow.
Class 10000 Fans:
Owners Manuals
- Class 10000 Owner's Manual (Standard, Automatic and Heavy Duty)
- Modular Extended Hub Assembly Instructions
Class 10000 Standard Duty Dimensional drawings
Class 10000 Automatic Dimensional drawings
- Series 24 CSP Automatic Right Hand Rotation
- Series 30 CSP Automatic Right Hand Rotation
- Series 36 CSP Automatic Right Hand Rotation
- Series 42 CSP Automatic Right Hand Rotation
- Series 48 CSP Automatic Right Hand Rotation
- Series 60 CSP Automatic Right Hand Rotation
- Series 72 CSP Automatic Right Hand Rotation
Class 10000 Heavy Duty Dimensional drawings
- Series 24 HD Left Hand Rotation
- Series 24 HD Right Hand Rotation
- Series 30 HD Left Hand Rotation
- Series 30 HD Right Hand Rotation
- Series 36 HD Left Hand Rotation
- Series 36 HD Right Hand Rotation
- Series 42 HD Left Hand Rotation
- Series 42 HD Right Hand Rotation
- Series 48 HD Left Hand Rotation
- Series 48 HD Right Hand Rotation
- Series 60 HD Left Hand Rotation
- Series 60 HD Right Hand Rotation
- Series 72 HD Left Hand Rotation
- Series 72 HD Right Hand Rotation
Class 10000 Extended Chord Dimensional Drawings
- Series 24 HD Fan Extended Chord Right Hand Rotation
- Series 30 HD Fan Extended Chord Right Hand Rotation
- Series 36 HD Fan Extended Chord Right Hand Rotation
- Series 42 HD Fan Extended Chord Right Hand Rotation
- Series 48 HD Fan Extended Chord Right Hand Rotation
- Series 60 HD Fan Extended Chord Right Hand Rotation
- Series 72 HD Fan Extended Chord Right Hand Rotation
- Class 1000 Installation instructions
- Series 10 Left Hand Rotation
- Series 10 Right Hand Rotation
- Series 10 Parts list
- Series 16 Left Hand Rotation
- Series 16 Right Hand Rotation
- Series 16 Parts list
- Class 5000 Series 27 Engine Drive Left Hand Dimensional Prints
- Class 5000 Series 27 Engine Drive Right Hand Dimensional Prints
- Class 5000 Series 33 Engine Drive Left Hand Dimensional Prints
- Class 5000 Series 33 Engine Drive Right Hand Dimensional Prints
- Class 5000 Series 40 Engine Drive Left Hand Dimensional Prints
- Class 5000 Series 40 Engine Drive Right Hand Dimensional Prints
- Class 5000 Series 49 Engine Drive Left Hand Dimensional Prints
- Class 5000 Series 49 Engine Drive Right Hand Dimensional Prints
- Class 5000 Series 60 Engine Drive Left Hand Dimensional Prints
- Class 5000 Series 60 Engine Drive Right Hand Dimensional Prints
- Class 5000 Series 33 Automatic Dimensional Prints
- Class 5000 Series 40 Automatic Dimensional Prints
- Class 5000 Series 49 Automatic Dimensional Prints
- Class 5000 Series 60 Automatic Dimensional Prints
- Class 5000 Series 73 Automatic Dimensional Prints
- Class 5000 Series 19 Manual Dimensional Prints
- Class 5000 Series 27 Manual Dimensional Prints
- Class 5000 Series 33 Manual Dimensional Prints
- Class 5000 Series 40 Manual Dimensional Prints
- Class 5000 Series 49 Manual Extended Hub Dimensional Prints
- Class 5000 Series 49 Manual Dimensional Prints
- Class 5000 Series 60 Manual Extended Hub Dimensional Prints
- Class 5000 Series 60 Manual Dimensional Prints
- Class 5000 Series 73 Manual Dimensional Prints
Class 1000 Fans:
Class 5000 Fans:
Owners Manuals
Engine Drive Dimensional drawings
Automatic Dimensional drawings
Manual Dimensional
drawings
[ HOME PAGE ] [CONTACT MOORE ]